R&S SMW-K44, User Manual

Page: 208 / 455

Remote-Control Commands Satellite Navigation
208 User Manual 1178.6379.02 ─ 01
Example: See Example "Selecting a predefined test scenario"
on page 207.
Usage: Event
Manual operation: See "Set to Default" on page 24
[:SOURce<hw>]:BB:GNSS:STATe <State>
Enables/disables the GNSS signal simulation.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: See Example "Selecting a predefined test scenario"
on page 207.
Manual operation: See "State" on page 24
[:SOURce<hw>]:BB:GNSS:SCENario?
Queries the current scenario.
Return values:
<Scenario> string
None: indicates preset configuration and user-defined configura-
tion.
Scenario name: if predefined scenario is selected.
Filename: if saved settings configuration is loaded.
Example: See Example "Selecting a predefined test scenario"
on page 207.
Usage: Query only
Manual operation: See "Scenario" on page 25
[:SOURce<hw>]:BB:GNSS:TMODe <SMode>
Sets the test mode.
Parameters:
<SMode> NAVigation | TRACking
*RST:
STATic
Example: See Example "Selecting a predefined test scenario"
on page 207.
Manual operation: See "Test Mode" on page 25
General Settings