R&S SMW-K44, User Manual

Page: 231 / 455

Remote-Control Commands Satellite Navigation
231 User Manual 1178.6379.02 ─ 01
Parameters:
<Roll> float
Range:
-180 to 180
Increment: 0.001
*RST:
0
Example: See Example "Moving receiver" on page 226.
Manual operation: See "Yaw/Heading, Pitch/Elevation, (Start) Roll/Bank"
on page 45
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ATTitude:SPIN:RATE <Rate>
Sets the constant rate of change of the roll.
Parameters:
<Rate> float
Range:
-400 to 400
Increment: 0.01
*RST:
0
Example: See Example "Moving receiver" on page 226.
Options: R&S SMW-K108
Manual operation: See "Spinning Rate" on page 46
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:WAYPoints:FILE
<WayPoints>
Selects a predefined or user-defined waypoint files to simulate a moving scenario.
Parameters:
<WayPoints> Filename or complete file path incl. extension
Waypoint files have the extension
*.txt
,
*.nmea
,
*.kml
or
*.xtd
.
Example: See Example "Moving receiver" on page 226.
Manual operation: See "Waypoints File" on page 47
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:WAYPoints:ROMode
<RoMode>
Defines the way the waypoint/attitude file is processed.
Parameters:
<RoMode> CYCLic | RTRip | OWAY
*RST:
OWAY
Example: See Example "Moving receiver" on page 226.
Manual operation: See "Readout Mode" on page 47
Receiver Positioning Configuration Commands