R&S SMW-K44, User Manual

Page: 166 / 455

Multi-Band, Multi-Antenna and Multi-Vehicle Scenarios Satellite Navigation
166 User Manual 1178.6379.02 ─ 01
14.1 Related Settings
This section lists only on the settings that are dedicated to the advanced mode . All
other settings are the same as for the standard mode. For description, see the corre-
sponding section.
Receiver > Number of Vehicles ...................................................................................166
Monitor > Vehicles .......................................................................................................166
Monitor > Antennas .....................................................................................................166
SV Selection Criteria > Reference Vehicle ..................................................................167
Receiver > Number of Vehicles
Option: R&S SMW-K120
(Access: "GNSS > Simulation Configuration > Receiver")
In "GNSS Advanced" mode, sets the number of simulated vehicles.
Further receiver settings, like position, antennas or environment effects apply for the
vehicle indicated on the side tab.
Remote command:
[:SOURce<hw>]:BB:GNSS:VEHicle:COUNt
on page 381
Monitor > Vehicles
Option: R&S SMW-K120
(Access: "GNSS > Simulation Monitor")
In "GNSS Advanced" mode, selects the vehicle for that the displayed information
applies.
"V2" is enabled if Receiver > Number of Vehicles = "2"
Monitor > Antennas
Option: R&S SMW-K120
(Access: "GNSS > Simulation Monitor")
In "GNSS Advanced" mode, selects the antenna for that the displayed information
applies.
Related Settings