R&S SMW-K44, User Manual

Page: 41 / 455

Receiver Type and Position Satellite Navigation
41 User Manual 1178.6379.02 ─ 01
Settings
Receiver > Number of Vehicles .....................................................................................41
Positioning .....................................................................................................................41
Positioning Configuration .............................................................................................. 41
Receiver > Number of Vehicles
Option: R&S SMW-K120
(Access: "GNSS > Simulation Configuration > Receiver")
In "GNSS Advanced" mode, sets the number of simulated vehicles.
Further receiver settings, like position, antennas or environment effects apply for the
vehicle indicated on the side tab.
Remote command:
[:SOURce<hw>]:BB:GNSS:VEHicle:COUNt
on page 381
Positioning
Determines what kind of receiver is simulated.
"Static" Receiver located at one of the predefined or at a user-defined posi-
tion.
See
Chapter 7.2, "Static Receiver" , on page 42.
"Moving" Receiver that is moving according to a trajectory as described in a
file.
Can be used to simulate pedestrians, cars, ships, or airplanes.
See
Chapter 7.3, "Moving Receiver" , on page 46
Remote command:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:POSition
on page 227
Positioning Configuration
Accesses further configuration, depending on the selected recevier type.
See:
●
Chapter 7.2, "Static Receiver" , on page 42
●
Chapter 7.3, "Moving Receiver" , on page 46
Receiver Type