Remote-Control Commands
Satellite Navigation
284
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIMulated:CLOCk:WNOC
................................ 292
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:SIMulated:CLOCk:TOC
................................. 292
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SIMulated:CLOCk:TOC
...............................292
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SIMulated:CLOCk:TOC
............................... 292
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIMulated:CLOCk:TOC
................................... 292
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:CLOCk:AF<s2us0>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:SIMulated:CLOCk:AF<s2us0>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SIMulated:CLOCk:AF<s2us0>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:SIMulated:CLOCk:AF<s2us0>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SIMulated:CLOCk:AF<s2us0>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIMulated:CLOCk:AF<s2us0>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:SIMulated:CLOCk:TGD
................................. 293
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SIMulated:CLOCk:TGD
...............................293
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:SIMulated:CLOCk:TGD
............................ 293
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SIMulated:CLOCk:TGD<s2us>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SIMulated:CLOCk:TGD
................................... 293
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:NMESsage:CNAV:CCORection:ISC:L2C
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:NMESsage:CNAV:CCORection:ISC:L2C:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:NMESsage:CNAV:CCORection:ISC:L5I
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:NMESsage:CNAV:CCORection:ISC:L5I:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:NMESsage:CNAV:CCORection:ISC:L5Q
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:NMESsage:CNAV:CCORection:ISC:L5Q:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:NMESsage:CNAV:CCORection:ISC:L1CA:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:NMESsage:CNAV:CCORection:ISC:L1CA
[:SOURce<hw>]:BB:GNSS:SSValues
<ShowScaledValue>
Defines if the navigation message parameters are set as scaled or unscaled values
and thus which subset of remote-control commands is used.
Parameters:
<ShowScaledValue> 0 | 1 | OFF | ON
0
Used are unscaled values
The
SOURce<hw>:BB:GNSS:...:UNSCaled
commands
apply.
1
Used are scaled values
Commands without the mnemonic
UNSCaled
apply.
*RST:
0
Example:
SOURce1:BB:GNSS:SSValues 0
SOURce1:BB:GNSS:SVID1:GPS:NMESsage:LNAV:EPHemeris:TOE:UNSCaled 28800
SOURce1:BB:GNSS:SSValues 1
SOURce1:BB:GNSS:SVID1:GPS:NMESsage:LNAV:EPHemeris:TOE 1800
Navigation Message Configuration