Remote-Control Commands
Satellite Navigation
296
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:PRERrors:COPY:SVID
<Svid>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:PRERrors:COPY:SVID
<Svid>
Sets the SV ID to that the configuration form the current satellite (
SVID<ch>
) is
applied.
Both SV IDs belong to the same GNSS system.
Parameters:
<Svid>
1 | 2 | 3 | 5 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 |
19 | 18 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 |
32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 |
46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 |
60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 |
74 | 75 | 76 | 77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 |
88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | 100 | 101 |
102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | 111 | 112 |
113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | 121 | 122 | 123 |
124 | 125 | 126 | 127 | 128 | 129 | 130 | 131 | 132 | 133 | 134 |
135 | 136 | 137 | 138 | 139 | 140 | 141 | 142 | 143 | 144 | 145 |
146 | 147 | 148 | 149 | 150 | 151 | 152 | 153 | 154 | 155 | 156 |
157 | 158 | 159 | 160 | 161 | 162 | 163 | 164 | 165 | 166 | 167 |
168 | 169 | 170 | 171 | 172 | 173 | 174 | 175 | 176 | 177 | 178 |
179 | 180 | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 |
190 | 191 | 192 | 193 | 194 | 195 | 196 | 197 | 198 | 199 | 200 |
ALL
*RST:
1
Example:
See
Example "Configuring a pseudorange error ramp"
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:PRERrors:COPY:EXECute
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:PRERrors:COPY:EXECute
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:PRERrors:COPY:EXECute
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:PRERrors:COPY:EXECute
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:PRERrors:COPY:EXECute
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:PRERrors:COPY:EXECute
Applies the configuration of the current satellite (
SVID<ch>:<GNSS system>
) to the
satellite defined with the command
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:
.
Both SV IDs belong to the same GNSS system.
Example:
See
Example "Configuring a pseudorange error ramp"
Usage:
Event
Manual operation:
See
Navigation Message Configuration