Toro DT35 Series, Installation & Service Instructions Manual

Page: 1 / 12

Introduction ____________________________________________________________________
The DT35 and DT55 series full-circle/adjustable part-circle rotary sprinklers are
designed specifically for golf course applications.
Manufactured from durable, high-strength engineering plastic and stainless-steel
components, these sprinklers incorporate many innovative and time-proven
features for lasting, maintenance-free operation.
Prior to installing the sprinkler, read through the recommended installation and
start-up procedures. Please observe all
WARNINGS and CAUTIONS when
installing and operating this equipment.
Features ________________________________________________________________________
DT35 and DT55 Series Rotary Sprinklers
Installation & Service Instructions
O F F
A U T
O
O N
DT35 Electric VIH DT55 Electric VIH
■ Full-circle (360°) with uni-directional clockwise rotation and
adjustable part-circle (40°–330°) configuration
■ Arc adjustment from riser band in 5° increments
■ Trajectory main nozzle - Selectable 15° or 25°
■ Full 4" (10.2 cm ) pop-up clears tall grasses
■ Color-coded nozzles by radius and gallonage
■ Cap serves as an effluent water indicator
■ Variable stator ensures 3-minute rotation
■ Selectable pressure regulation settings of 50 psi (3.4 bar),
65 psi, 80 psi or 100 psi to ensure consistently accurate
nozzle performance regardless of elevation (Electric only)
■
Three valve activation types available: Electric Valve-In-Head,
Normally Open Hydraulic Valve-In-Head, and Check-O-Matic
DT35 Series
■ Radius: 43'–88' (13,1 m–26,8 m) @ 25° trajectory
■ Flow Rate: 15–50 GPM (56,8–189,3 LPM)
■ Trajectory: Selectable 15° or 25°
■ Arc: full circle (360°) or adjustable part circle (40°–330°)
■ Recommended operating pressure: 65–100 psi (4,5–6,9 bar)
■
Minimum pressure: 40 psi (2,8 bar)
■
Maximum pressure: 150 psi (10,3 bar)
■
Precipitation rate:
■
Minimum: 0.46"/hr (1,17 cm/hr)
■
Maximum: 0.63"/hr (1,60 cm/hr)
■
Inlet Size: 1" (25 mm) NPT, BSP or ACME
■
Electric Valve-in-head Solenoid:
■
Inrush current: 0.30A @ 24 VAC, 50/60 Hz
■
Holding current: 0.20A @ 24 VAC, 50/60 Hz
■
Check-O-Matic model checks up to 37' (11,27 m) of elevation
■ Three valve activation types available: Electric Valve-In-Head,
Normally Open Hydraulic Valve-In-Head, and Check-O-Matic
■ Three body thread types available: NPT, BSP and ACME
■ Manual sprinkler operation control: On-Off-Auto (Electric only)
■ All internal components serviceable from the top of the
sprinkler
■ Large selection of color-coded nozzles available
■ Durable plastic and stainless-steel construction
■ Constant velocity drive
■ Optional back nozzles available
■ Color-coordinated nozzles
■ Optional radius reduction screw
DT55 Series
■ Radius: 52'–95' (15,8–28,9 m) @ 25° trajectory
■ Flow rate: 15–62 GPM (56,8–234,7 LPM)
■ Trajectory: Selectable 15° or 25°
■ Arc: full circle (360°) or adjustable part circle (40°–330°)
■ Recommended operating pressure: 65–100 psi (4,5–6,9 bar)
■ Minimum pressure: 40 psi (2,8 bar)
■ Maximum pressure: 150 psi (10,3 bar)
■ Precipitation rate:
■
Minimum: 0.50"/hr (1,27 cm/hr)
■
Maximum: 0.72"/hr (1,83 cm/hr)
■ Inlet Size: 1.5" (38 mm) NPT, BSP or ACME
■ Electric Valve-in-head Solenoid:
■
Inrush current: 0.30A @ 24 VAC, 50/60 Hz
■
Holding current: 0.20A @ 24 VAC, 50/60 Hz
■ Check-O-Matic model checks up to 37' (11,27 m) of elevation
Note : For preliminary use only.
Specifications and Performance /Application Data ________________________________________