R&S SMW-K44, User Manual

Page: 236 / 455

Remote-Control Commands Satellite Navigation
236 User Manual 1178.6379.02 ─ 01
Manual operation: See "Body Mask, Antenna Pattern" on page 90
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:STATe <State>
Activates the antenna.
Parameters:
<State> 0 | 1 | OFF | ON
Example: See Example "Selecting an antenna pattern and body mask file"
on page 233.
Manual operation: See "Active" on page 90
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DBANk <DeltaBank>
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DHEading <DeltaHeading>
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DELevation <DeltaElevation>
Sets the antenna orientation and tilt.
The values are set relative to the center of gravity (COG).
Parameters:
<DeltaElevation> float
Range:
-180 to 180
Increment: 0.001
*RST:
0
Example: See Example "Selecting an antenna pattern and body mask file"
on page 233.
Manual operation: See "Delta Heading, Delta Elevation, Delta Bank" on page 91
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DX <DeltaX>
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DY <DeltaY>
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:A<ch>:DZ <DeltaZ>
Sets the antenna position as an offset on the x, y and z axis, where the offset is
applied relative to center of gravity (COG).
Parameters:
<DeltaZ> float
Range:
-200 to 200
Increment: 0.001
*RST:
0
Example: See Example "Selecting an antenna pattern and body mask file"
on page 233.
Manual operation: See "Delta X, Delta Y, Delta Z" on page 91
Antenna Pattern and Body Mask