Remote-Control Commands
Satellite Navigation
259
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SV:IMPort:QZSS:FILE:NMESsage
<Filename>
[:SOURce<hw>]:BB:GNSS:SV:IMPort:GPS:FILE:NMESsage
<Filename>
Selects the file from that the navigation data is extracted.
For overview of hte supported file types, see
.
Parameters:
<Filename>
string
Filename, incl. file path and file extension.
Example:
See
Example "Loading historical data"
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SV:IMPort:GALileo:EXECute
[:SOURce<hw>]:BB:GNSS:SV:IMPort:GLONass:EXECute
[:SOURce<hw>]:BB:GNSS:SV:IMPort:QZSS:EXECute
[:SOURce<hw>]:BB:GNSS:SV:IMPort:GPS:EXECute
Triggers the import of constellation and navigation data from the selected files.
Example:
See
Example "Loading historical data"
Usage:
Event
Manual operation:
See
19.10 Signals and Power Configuration per Satellite
Example: Configuring the SV power and modulation control settings
SOURce1:BB:GNSS:PRESet
SOURce1:BB:GNSS:TMODe NAV
// activate C/A and P codes in L1 band
SOURce1:BB:GNSS:SYSTem:GPS:SIGNal:L1Band:CA:STATe 1
SOURce1:BB:GNSS:SYSTem:GPS:SIGNal:L1Band:P:STATe 1
// activate GPS SVID#1
SOURce1:BB:GNSS:SVID1:GPS:STATe 1
SOURce1:BB:GNSS:SVID1:GPS:PRESent 1
// set power-related settings
SOURce1:BB:GNSS:POWer:REFerence -120
SOURce1:BB:GNSS:SVID1:GPS:POWer:PLOSs 1
SOURce1:BB:GNSS:SVID1:GPS:POWer:OFFSet -3
SOURce1:BB:GNSS:SVID1:GPS:SIGNal:L1Band:CA:POWer:OFFset 0
SOURce1:BB:GNSS:SVID1:GPS:SIGNal:L1Band:P:POWer:OFFset -3
// apply the settings to SVID#11
SOURce1:BB:GNSS:SVID1:GPS:POWer:COPY:SVID 11
SOURce1:BB:GNSS:SVID1:GPS:POWer:COPY:EXECute
Signals and Power Configuration per Satellite