Getting started
R&S
®
AREG800A
38
User Manual 1179.3615.02 ─ 01
Digital IO DD
Digital I/Q connectors "Digital IO DD 1" to "Digital IO DD 4" provided for future use; one
connector per instrument board (R&S
AREG8-B9).
Aux IF In
SMA female connectors "Aux IF In 1" and "Aux IF In 2" for input of an additional inter-
ferer to the generated echo signal; two connectors per instrument board (R&S
AREG8-
B9).
Aux IF Out
SMA female connectors "Aux IF Out 1" and "Aux IF Out 2" for output of IF signals for
signal analysis; two connectors per instrument board (R&S
AREG8-B9).
Rx IF Out
SMA female connectors "Rx IF Out 1" and "Rx IF Out 2" for input of the intermediate
frequency (IF) signal from the external frontend to the R&S
AREG800A (Rx); two con-
nectors per instrument board (R&S
AREG8-B9).
Tx IF In
SMA female connectors "Tx IF In 1" and "Tx IF In 2" for output of the intermediate fre-
quency (IF) signal from R&S
AREG800A to the external frontend (Tx); two connectors
per instrument board (R&S
AREG8-B9).
3.3
Trying out the instrument
This chapter introduces the first steps with the R&S
AREG800A. It shows how to oper-
ate and configure the instrument using simple examples. The complete description of
the functionality and its usage is given in the R&S
AREG800A user manual.
Basic instrument operation is described in
Chapter 3.4, "Instrument control"
Prerequisites
●
The R&S
AREG800A is set up, connected to power, and started up.
Chapter 3.1, "Preparing for use"
●
The R&S
AREG800A is connected to an external frontend, e.g. the R&S
QAT100.
Chapter 3.1.9, "Connecting the R&S
●
The R&S
AREG800A is manually operated via the touchscreen.
Try out the following:
Configuring static operation setups
.........................................................................39
.................................................................................. 40
Trying out the instrument
