R&S AREG800A, User Manual

Page: 63 / 411

Configuring radar objects
R&S
®
AREG800A
63 User Manual 1179.3615.02 ─ 01
Settings:
● Logging Configuration settings ................................................................................63
● Logging results ........................................................................................................64
5.4.1 Logging Configuration settings
Access:
► Select "Radar Objects > Logging > Logging Config".
The "Logging Config" tab provides settings to activate logging and to configure the
scope and the time base of logged data.
State ..............................................................................................................................63
Logging Level ................................................................................................................63
Timebase .......................................................................................................................63
State
Activates logging.
You can define the scope of logged data, see "Logging Level" on page 63.
Remote command:
[:SOURce<hw>]:AREGenerator:DLOGging[:STATe]
on page 321
Logging Level
Defines the scope of logged data.
"All" Logged data includes information on errors, warnings and info mes-
sages.
"Error and Warning"
Logged data includes information on errors and warnings.
"Error"
Logged data includes information on errors.
Remote command:
[:SOURce<hw>]:AREGenerator:DLOGging:LEVel
on page 321
Timebase
Sets the time base of the logged data.
Remote command:
[:SOURce<hw>]:AREGenerator:DLOGging:TBASe
on page 322
Logging settings