R&S AREG800A, User Manual

Page: 348 / 411

Remote control commands
R&S
®
AREG800A
348 User Manual 1179.3615.02 ─ 01
Example: See Example "Detecting and assigning a power sensor"
on page 345.
Manual operation: See "Scan" on page 100
:SLISt:SCAN:LSENsor <IP>
Scans for R&S NRP power sensors connected in the LAN.
Setting parameters:
<IP> string
*RST:
0
Example: See Example "Detecting and assigning a power sensor"
on page 345.
Usage: Setting only
Manual operation: See "Add LAN Sensor settings" on page 100
:SLISt:SCAN:USENsor <DeviceID>, <Serial>
Scans for R&S NRP power sensors connected over a USB interface.
Parameters:
<Serial> integer
Range:
0 to 999999
Setting parameters:
<DeviceID> String or Integer
Range:
0 to 999999
*RST: 0
Example: See Example "Detecting and assigning a power sensor"
on page 345.
Usage: Setting only
Manual operation: See "Add USB Sensor settings" on page 101
:SLISt:CLEar:LAN
Removes all R&S NRP power sensors connected in the LAN from the list.
Example: See Example "Detecting and assigning a power sensor"
on page 345.
Usage: Event
Manual operation: See "Clear" on page 100
:SLISt:CLEar:USB
Removes all R&S NRP power sensors connected over USB from the list.
SENSe, READ, INITiate and SLISt subsystems