Troubleshooting and notifications
R&S
®
AREG800A
371
User Manual 1179.3615.02 ─ 01
"Designation"
Name of option
"Expiration Date"
For regular options, "Permanent" is indicated in this column. Some
options are available as trial versions. This column shows their expi-
ration date. After this date, the option is no longer available on the
instrument.
Remote command:
Versions
The "Versions" tab shows the versions of the technical specification of the
R&S
AREG800A and of the software components that comprise the firmware.
"Package"
Name of the component.
"Version"
Current issue of the component.
Remote command:
:SYSTem:SPECification:VERSion:FACTory?
12.7.3
How to query instrument configuration
To get information on the components and installed options of the R&S
AREG800A,
proceed as described in the following examples.
Checking the installed hardware options
To find out the installed options:
1. Select "System Config > Setup > Instrument Assembly > Versions/Options".
2. Select "Hardware Options".
The dialog lists all hardware options that are installed on the R&S
AREG800A.
Proceed the same way to get information for instance on the firmware, or the installed
software options in the corresponding tab.
Checking the RF hardware assembly
To find out the installed RF hardware:
1. Select "System Config > Setup > Instrument Assembly > Hardware Config".
2. Select "RF Assembly".
The dialog lists the RF hardware components that are installed on the
R&S
AREG800A.
Requesting instrument configuration and specifications
