R&S AREG800A, User Manual

Page: 291 / 411

Remote control commands
R&S
®
AREG800A
291 User Manual 1179.3615.02 ─ 01
Usage: Query only
Manual operation: See "HISLIP" on page 199
See "GPIB" on page 200
:SYSTem:COMMunicate:NETWork:IPADdress <IpAddress>
Sets the IP address.
Parameters:
<IpAddress> string
Range:
0.0.0.0. to ff.ff.ff.ff
Example: See Example "Retrieving information on network-related set-
tings" on page 280.
Manual operation: See "IP Address" on page 197
:SYSTem:COMMunicate:NETWork:IPADdress:MODE <Mode>
Selects manual or automatic setting of the IP address.
Parameters:
<Mode> AUTO | STATic
*RST:
n.a. (factory preset: AUTO)
Example: See Example "Retrieving information on network-related set-
tings" on page 280.
Manual operation: See "Address Mode" on page 197
:SYSTem:COMMunicate:NETWork:MACaddress <MacAddress>
Queries the MAC address of the network adapter.
This is a password-protected function. Unlock the protection level 1 to access it.
Parameters:
<MacAddress> string
Example: See Example "Retrieving information on network-related set-
tings" on page 280.
Manual operation: See "MAC Address" on page 198
:SYSTem:COMMunicate:NETWork:RESource?
Queries the visa resource string for Ethernet instruments.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA resource strings"
on page 280.
SYSTem subsystem