R&S AREG800A, User Manual

Page: 117 / 411

Configuring the operation setup
R&S
®
AREG800A
117 User Manual 1179.3615.02 ─ 01
Remote command:
:SYSTem:COMMunicate:RT:NETWork:RESTart
on page 306
:SYSTem:COMMunicate:SYST:NETWork:RESTart
on page 309
Hostname
Displays the hostname of the instrument connected to the network.
Remote command:
:SYSTem:COMMunicate:RT:NETWork[:COMMon]:HOSTname
on page 306
:SYSTem:COMMunicate:SYST:NETWork[:COMMon]:HOSTname
on page 309
Address Mode
Selects the mode for assigning the IP address.
"Auto (DHCP)" Assigns the IP address automatically, provided the network supports
DHCP (Dynamic Host Configuration Protocol).
"Static" Enables you to assign the IP address manually.
Remote command:
:SYSTem:COMMunicate:RT:NETWork:IPADdress:MODE
on page 307
:SYSTem:COMMunicate:SYST:NETWork:IPADdress:MODE
on page 309
IP Address
Sets the IP address of the instrument taht is connected to the realtime/system control
network.
Remote command:
:SYSTem:COMMunicate:RT:NETWork:IPADdress
on page 307
:SYSTem:COMMunicate:SYST:NETWork:IPADdress
on page 309
Subnet Mask
Sets the bit group of the subnet in the host identifier.
Remote command:
:SYSTem:COMMunicate:RT:NETWork[:IPADdress]:SUBNet:MASK
on page 307
:SYSTem:COMMunicate:SYST:NETWork[:IPADdress]:SUBNet:MASK
on page 310
MAC Address
Indicates the MAC (Media Access Control) address, a unique identifier of the network
adapter in the connected instrument.
Remote command:
:SYSTem:COMMunicate:RT:NETWork:MACaddress
on page 307
:SYSTem:COMMunicate:SYST:NETWork:MACaddress
on page 310
Show Connector
Accesses a dialog that displays the physical location of the selected connector on the
front/rear panel of the instrument.
Remote command:
n.a.
System Control Network settings