R&S AREG800A, User Manual

Page: 261 / 411

Remote control commands
R&S
®
AREG800A
261 User Manual 1179.3615.02 ─ 01
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
n.a. (factory preset: 1)
Example: See Example "Activating screen saver mode and display
update" on page 258
Manual operation: See "Annotation Amplitude" on page 165
:DISPlay:ANNotation:FREQuency <State>
Indicates asterisks instead of the frequency values in the status bar.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
n.a. (factory preset: 1)
Example: See Example "Activating screen saver mode and display
update" on page 258
Manual operation: See "Annotation Frequency" on page 165
:DISPlay:ANNotation[:ALL] <State>
Displays asterisks instead of the level and frequency values in the status bar of the
instrument.
We recommend that you use this mode if you operate the instrument in remote control.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
1
Example: See Example "Activating screen saver mode and display
update" on page 258
:DISPlay:DIALog:ID?
Returns the dialog identifiers of the open dialogs in a string separated by blanks.
Return values:
<DialogIdList> <DialogID#1>< ><DialogID#2>< > ... < ><DialogID#n>
Dialog identifiers are string without blanks. Blanks are represen-
ted as
$$
.
Dialog identifiers
<DialogID>
are composed of two main parts:
<DialogName>[<OptionalParts>]
<DialogName>
Meaningful information, mandatory input parameter for the com-
mands:
:DISPlay:DIALog:OPEN
on page 262
:DISPlay:DIALog:CLOSe
on page 262
DISPlay subsystem