Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 109 / 161

Troubleshooting SE4000 MPEG-2 Contribution Encoder
6-6 01-0934-401-B
Once a fault condition sets the fault relay and illuminate the status LED on the front panel, they
must be cleared manually by either:
•
Selecting the front panel Status>Relay>Clear option.
•
Issuing a remote
FM RELAY_CLR
command.
6.4.1 Viewing Fault Relay Log on the Front Panel
The Relay fault History works similarly to the History and Current menus. To view the fault history
log on the front panel, perform these steps.
1.
From the main menu, select the Status menu.
SE4000 >
QUICKSET SERVICE OUTPUT [STATUS]
2.
The Status menu displays. Select Relay.
SE4000/Status >
Current History [ Relay ]
3.
The Fault Relay menu displays. You may scroll through the fault list displayed in a
similar manner to the fault history described above.
SE4000/Status/Relay >
Digital Video Loss of Input
4.
The LCD displays the most recent faults. In order to clear rthe fault relay, you must press
the right arrow. The display will be as below.
SE4000/Status/Relay >
Press enter to Clear Fault Relay List
5.
Pressing enter will reset the fault relay and clear all of the faults saved in the list. If no
faults exist, the LCD displays
No Fault.