Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 46 / 161

SE4000 MPEG-2 Contribution Encoder Using the Front Panel
01-0934-401-B 3-13
Front Panel Menu Summary
Command Function Options/Response Format
configuration in non-volatile
(flash) memory under the
selected user configuration label.
saved. Configuration sets must be saved to
existing user-defined labels. If there are no user
labels defined,
<empty list> is displayed.
User-defined labels are set using the
Config>Quickset>New feature.
Config>Service
#>Video>Input
Used to configure the SE4000 video input section.
Note: for embedded audio, Config>Service # >Video>Input Source must be set to
digital, Config>Service # >Audio must be set to digital, and Config>Service #
>Audio>Source must be set to SDI.
Input Source Sets the encoder input video
source.
? SDI - Digital
? analog (default)
Note: for embedded audio, Config>Service #
>Video>Input Source must be set to digital;
Config>Service # >Audio must be set to digital, and
Config>Service #> Audio>Source must be set to
SDI.
AGC Sets Analog video AGC on or off
– only available when Analog
input is selected
? On (default)
? Off
Format Query-only. Displays the analog
video format.
? 525
? 625
?
no video
if there is no video input
Format Ctrl Sets the video format mode
when the input source is set to
analog.
? auto – unit automatically senses incoming video
signal format and configures the video mode to
match (default).
? PAL – 625 line PAL-N mode.
? NTSC – 525 line NTSC mode.
? NTSC 0SU – no pedestals NTSC 0SU mode.