Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 62 / 161

SE4000 MPEG-2 Contribution Encoder Using the Front Panel
01-0934-401-B 3-29
3.10.2 Creating a New User Configuration
To create a new user-defined configuration label:
1.
Select Config from the main menu. The Configuration menu displays.
2.
Select Presets. The Preset menu appears.
3.
Select New. The New Preset menu and its option
Enter Name = 0
displays. The zero
is replaced with the first alphanumeric key press.
4.
Using the alphanumeric keypad, enter a name for the configuration set. The name can
be up to 15 characters in length. For alphanumeric characters, use numbers similar to a
standard phone keypad. For example, to enter a “B”, press the 2 button until a B is
displayed, then the right shift button.
5.
Press Enter. The new level is added to the configuration list and the system returns to
the Presets menu.
6.
To save a configuration set under this label, follow the steps under Saving a User
Configuration Under an Existing Label.
The configuration process may take a minute. When the system has completed its
configuration process, the LCD returns to the ATM Access DVB MPEG-2 Contribution
Encoder menu.
3.10.3 Saving a User Configuration Under an Existing Label
To save a user-defined configuration set under an existing label:
1.
Configure the SE4000 with the required parameters.
2.
Once all the parameters are correctly set, select Config from the main menu. The
Configuration menu displays.
3.
Select Presets. The Preset menu displays.
4.
Select Save. The Save menu displays.
5.
Use the Up or Down buttons to scroll through the list and select the correct configuration
label.
6.
Press Enter. The Configuration process may take up to two minutes. When the system
has completed its configuration process, the asterisk will disappear.
The operating parameters in use at the time the restore process is
executed are overwritten and will be lost if not previously saved as a
configuration set.