Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 65 / 161

Using a Remote Unit SE4000 MPEG-2 Contribution Encoder
4-32 01-0934-401-B
3.12.2 Setting the Time
The time is in a 24-hour format and must be set from 00 to 23, where 00 is midnight and 23 is 11
PM. For example, for 8 AM the hours would be set to 08, and for 8 PM the hours would be set to
20. Both minutes and seconds can be set from 00 to 59. To set the time:
1.
From the main menu, select Config. The Configuration menu displays.
2.
Select Control. The Control menu displays.
3.
Select Clock. The Date parameter displays.
4.
Scroll to the Time parameter using the right or left buttons.
5.
Use the keypad to type in the correct hour, minutes, and seconds in the format
hh:mm:ss
. The SE4000 automatically enters the colons “:”.
6.
Press the Enter button.
3.13 System Reset
To reset the SE4000:
1.
From the main menu, select Config. The Configuration menu displays.
2.
Select Control. The Control menu displays.
3.
Select Reset.
4.
Press the Enter key.
The SE4000 is reset to the last configuration set; all programmable logic and firmware is
reloaded; the unit is restarted; and the fault history log is cleared.
3.14 Embedded Audio Configuration
3.14.1 Configuring the Encoder for Embedded Audio
To configure the encoder for embedded audio, the following parameters must be set:
•
Config>Service # >Video>Input Source must be set to digital
•
Config>Service # >Audio must be set to digital
•
Config>Service # >Audio>Source must be set to D1
3.15 Embedded Audio Configuration (BISS/PGCA)
For information on configuring the SE4000 for BISS or PGCA conditional access, refer to the
appendix on conditional access.
3.16 VBI: Teletext, Closed Captions, and Expanded Windows
For information on configuring the SE4000 for teletext, closed captions, or expanded windows
VBI operations, refer to the appendix on VBI data transmission.