Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 86 / 161

SE4000 MPEG-2 Contribution Encoder Using a Remote Unit
01-0934-401-B 4-21
SE4000 Remote Command Descriptions
Remote Command Parameter
Range
Factory
Default
Description
TAB NIT_NAME <string> MPEG-2
Encoder Used to enter the network name, up to 115
characters may be used.
Front panel command equivalent: none
TAB NIT_NETID 0 to 65535
(decimal)
0 Used to enter the Network ID in the NIT.
Front panel command equivalent: none
TAB NIT_POL Hor, Vert, Left,
Right
Vert Sets the transmitted signal polarization.
Parameters are:
? Hor =linear- horizontal polarization
? Ver = linear- vertical polarization
? Left = circular- left polarization
? Right = circular- right polarization
Front panel command equivalent: none
TAB SATFREQ
<
###.##### >
000.00000 to
999.99999
011.75725 Sets the satellite frequency in GHz.
Front panel command equivalent: none
TAB NIT_SATPOS
<
###.# >
000.0° to
999.9°
019.2° Sets the satellite orbital position in degrees.
Front panel command equivalent: none
TAB NIT_SR
<
###.##### >
###.#### - Sets the NIT transmitted symbol rate (in sps).
Front panel command equivalent: none
TAB NIT_WSTFLG East, West West Sets the satellite orbital position. Parameters are:
? East = satellite orbital position is East
? West = satellite orbital position is West.
Front panel command equivalent: none
TAB PCR_PID < # > Where # is a
valid PID.
0 Sets the PCR PID to be included in the output
transport stream. Zero is the default PID.
Front panel command equivalent: none
TAB PMT_PID < # > Where # is a
valid PID.
0 Sets the Program Map Table (PMT) PID to be
included in the output transport stream. Zero is the
default PID.
Front panel command equivalent: none
TAB PROGNUM 1 to 223 (DVB)
2 to 223
(ATSC)
1 (DVB)
2 (ATSC)
Controls the program number for the PAT.
Changing the PAT program number automatically
sets the PMT to the same program number and
sets the EIT and SDT service ID to match the
program number.
Front panel command equivalent:
Config>Service>Setup>Service ID
TAB PROVIDER
<
string >
< string > Unnamed Used to enter the service provider name; name can
be up to 115 characters in length.
Front panel command equivalent:
Config>Service>Setup>Provider
TAB SDT_NAME
<
string >
< string > Service 1
(DVB)
Ch2
(ATSC)
Used to enter the service name; name can be up to
115 characters in length.
Front panel command equivalent:
Config>Service>Setup>Name
TAB TSID 0 to 65535 1 Sets the transport stream ID for the PAT Transport
Stream ID automatically changes the EIT, NIT, and
SDT Transport Stream IDs to the same ID.
Front panel command equivalent: none
TAB TYPE None, MPEG,
DVB, ATSC
DVB Controls the type of PSI/SI tables to be provided.
Works in conjunction with the CM Load Def
command.
Front panel command equivalent: Config>Tx
Strm>Table Type
TAB USR_A_PID
<
# >
Where # is a
valid PID.
0 Sets the Data A PID to be included in the output
transport stream. Zero is the default PID.
Front panel command equivalent: none