SE4000 MPEG-2 Contribution Encoder
Using the Front Panel
01-0934-401-B
3-21
Front Panel Menu Summary
Command
Function
Options/Response Format
Sets the clock source for the
synchronous auxiliary data
channel
Note: Clock Source is only
available for the synchronous
data channel.
?
internal – uses ST to latch the data
(default)
?
external – uses TT to latch the data
Clock Source
Additional Information: Clock Source allows you to select either an Internal (ST) or an
External (TT) clock to latch the input auxiliary data (SD). There are three different ways
to configure the clock sources for the SE4000 and a DTE. The following table lists
these different configurations along with the circumstances under which each is used.
n
The first option will produce the most reliable auxiliary data.
n
You should use the last option only if you are unable to configure your DTE for
either of the first two options.
Circumstance For Use
SE4000 Data
SE4000 Clock
DTE Clock
DTE Clock
Clock Source
Used to
Source
Sent to
Configuration
Latch Data
Configuration
SE4000 on TT
Option 1: DTE is able to
Internal
TT
External
ST
turn around ST and provide
ST back to the SE4000
as TT.
Option 2: DTE is not able to
External
TT
Internal
Internal
turn around ST, but has an
internal clock that can be
provided to the SE4000
as TT.
Option 3: DTE is not able to
Internal
ST
External
None
turn around ST and does
not have an internal clock
to provide to the SE4000
as TT.
For more information on configuring the auxiliary data channel clock source, refer to the
chapter on installing the SE4000.
Config>Service
# >Tables
Used to set the program clock reference parameters.
PIDS
Query-only, displays the PID
number.
•
Video
•
Audio A
•
Audio B
•
Async Data
•
Sync Data
•
PMT
•
PCR
MISC
Query-only, displays table
parameters
•
Table Standard (DVB or None)
•
Program Number
•
Provider
•
SDT Name
•
TX Stream ID
NIT
Query-only, displays the NIT
table parameters.
•
Code RateVideo
•
Mod Type
•
Network Name
•
Network ID
•
Polarity
•
Sat Freq
•
Sat Pos
•
Sym Rate
•
Westflag
Summary of Contents for TIERNAN SE4000
