Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 112 / 161

SE4000 MPEG-2 Contribution Encoder Troubleshooting
01-0934-401-B 6-9
SE4000 Fault Summary
Front Panel
Display Remote Unit
Display Description Action Required
Digital Video Input
AE.x Init AE.x Init Error Audio Init Error Power cycle the unit.
If normal
operations do
not resume,
contact the
Radyne
ComStream
Customer
Service
Department..
AE. X Inp
Invd AE.x AESEBU
Input Loss AESEBU Input Error If unit is functioning normally, clear faults
and continue operations.
If faults continue check connection;
ensure input source is in proper format
and conforms to specified input levels.
If unit continues to fail, contact the
Radyne ComStream Customer Service
Department.
AE.x L-Ch
Idle AE.x Left
Channel Idle Left Channel Idle Status message – informational only.
Continue operations.
AE.x
PesUndFlw AE.x PES FIFO
Overflow Audio PES (packetized
elementary stream)FIFO
Full MuX rate is set too low.
Recalculate all bit rates and enter correct
rates, or select Auto Mode.
AE.x
PesUndFlw AE.x PES FIFO
Underflow Audio PES (packetized
elementary stream)FIFO
Empty If unit is functioning normally, clear faults
and continue operations.
Contact the Radyne ComStream
Customer Service Department.
AE.x R-ch
Idle AE.x Right
Channel Idle Right Channel Idle Status message – informational only.
Continue operations.
MOD.x Init MOD. X Init
Error Modulator Initialization
Error Power cycle the unit.
If normal operations do not resume,
contact the Radyne ComStream
Customer Service Department.
MOD.x Inp
Loss MOD.x Loss of
Input Modulator is not receiving
the transport stream. Verify the connections.
Set modulator input to backplane.
Ensure Mux Rate = the Modulator rate.
MOD.x LO
Lock MOD.x Local
Oscill Unlocked Modulator Loss of Local
Oscillator Lock Verify the connections.
Set modulator input to backplane.
Ensure Mux Rate = the Modulator rate.
MOD.x No
Mux MOD.x No
Local Input
Source Modulator is not receiving
the transport stream. Verify the connections.
Set modulator input to backplane.
Ensure Mux Rate = the Modulator rate.
MOD.x SC
Lock MOD.x Symbol
Clock Unlocked Modulator Loss of Symbol
Clock Lock Verify the connections.
Set modulator input to backplane.
Ensure Mux Rate = the Modulator rate.
no front
panel fault S/W Error:
Software trap
encountered. Internal software error. Reset the unit.
If normal operations do not resume,
contact the Radyne ComStream
Customer Service Department.
no front
panel fault S/W Error:
Software
exception
encountered. Internal software error. Reset the unit.
If normal operations do not resume,
contact the Radyne ComStream
Customer Service Department.