Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 25 / 161

Introduction SE4000 MPEG-2 Contribution Encoder
2-4 01-0934-401-B
2.2 Rear Panel Connections
All SE4000 external connections are located on the rear panel, as shown in the following
illustration.
2.3 Video Ports
The SE4000 provides connections for both analog and digital video.
2.3.1 Analog Video In
Analog Video In is a female BNC connector with 75O impedance, accepting a NTSC or PAL
composite analog video input that is 1.0 Vp-p nominal level. The analog composite video input
must be compliant with SMPTE 170M NTC, ITU -R BT.470, or PAL-I/B/D. The connector shell is
connected to signal ground.
Connect the video input cable to the Analog Video In connector on the rear panel.
2.4 Audio Ports
2.4.1 Analog Audio
The SE4000 has the following sets of analog audio input ports:
•
Analog Audio A Right and Left.
•
Analog Audio B Right and Left.
The ports can be configured for two stereo or four
independent analog mono channels.
Each port has a female XLR connector with high
impedance (>10 kO) termination.