Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 61 / 161

Using a Remote Unit SE4000 MPEG-2 Contribution Encoder
4-28 01-0934-401-B
3.9 SE4000 Procedures
This section provides detailed steps for performing various SE4000 tasks.
Before beginning initial SE4000 installation and configuration, the
modulator output (Mod State) should be turned off until ready to begin
satellite transmissions.
3.10 Configuration Sets
3.10.1 Restoring a Default Factory Configuration
To restore a default configuration and set the table types:
1.
From the main menu, select Config. The Configuration menu appears.
2.
Select Presets. The Preset menu displays.
3.
Select Restore. The Restore menu displays.
4.
Use the Up or Down buttons to select the appropriate option and press Enter. The
system will perform its initialization process and reconfigure the SE4000 with the selected
parameters.
The reconfiguration process may take up to two minutes. When the system has
completed its configuration process, the LCD returns to the main menu.
The operating parameters in use at the time the restore process is
executed are overwritten and will be lost if not previously saved as a
configuration set.