Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 105 / 161

Troubleshooting SE4000 MPEG-2 Contribution Encoder
6-2 01-0934-401-B
6.2 Current Faults
Current faults are reported
real-time , which means that only conditions that are present at the
time of the query are displayed, regardless of what fault conditions have existed in the past. A
current fault exists when the Status LED is yellow.
6.2.1 Viewing Current Faults on the Front Panel
To view the current faults on the front panel LCD, perform the following steps:
1.
From the main menu, select Status.
SE4000 >
QUICKSET SERVICE OUTPUT [STATUS]
2.
The Status menu displays. Select Current.
SE4000/Status >
[ Current ] History Relay
3.
The Current Status menu displays. Only one fault is displayed on the LCD at one time. If
there is mpore than one fault detected, they can be viewed by pressing the up and down buttons.
In this case there are two faults detected and the first fault is displayed.
SE4000/Status/Current 1/2 >
Digital Video Loss of Input
4.
Pressing the down arrow will display the other fault.
SE4000/Status/Current 2/2 >
Audio A AES Loss of Input
5.
If there are no faults present in the SE4000, No Faults will be displayed.
SE4000/Status/Current >
No Faults