Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 50 / 161

SE4000 MPEG-2 Contribution Encoder Using the Front Panel
01-0934-401-B 3-17
Front Panel Menu Summary
Command Function Options/Response Format
Config>Service
# >Audio
(A or B)
Used to configure the SE4000 audio. Once the audio transmission is selected
as Digital or Analog, the audio channel (or slot) to configure is configured.
Audio Channels A or B can be configured as either Analog, Digital or
Embedded.
Note: for embedded audio, Config>Service # >Video>Input Source must be set
toSDI; Config>Service # >Audio must be set to digital, and Config>Service #
>Audio>Source must be set to SDI.
Enable Setting determines whether or
not audio is included in the
output transport stream.
? on – audio from that channel is included in
the output transport stream (default).
? off – audio from that channel is not include in
the output transport stream.
default:
? if digital audio: off
? if analog audio: on
PID Query-only; displays the audio
PID number included in the
output transport stream.
Default- Audio A 36 (24h)
Default- Audio B 37 (25h)
Source Sets the source of the audio. ? If digital audio: AESEBU, SDI (embedded
audio).
? If analog audio: analog.
Note: for embedded audio, Config>Service #
>Video>Input Source must be set to digital;
Config>Service # >Audio must be set to
digital, and Config>Service # >Audio>Source
must be set to SDI.
Sets the audio compression bit
rate
Bit Rate
Additional Information: Selecting
a high audio compressed bit rate
will produce a high-quality audio
signal at the output audio device;
however, a high audio
compressed bit rate reduces the
total transport stream bit rate
available for the video signal. An
audio compressed bit rate should
be selected that meets the audio
requirements while allowing
sufficient bandwidth to meet the
video requirements.
? If compression set to MPEG or ATSC: 64,
128, 192, 256, 384 Kbps
? If compression set to none: 1 to 4096000 bps
default: 256 Kbps
Compression
Format
Sets the output compression
format for the audio stream.
MPEG, AC3 2.0, AC3 Pass through,
uncompressed pass through