Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 119 / 161

Technical Specifications SE4000 MPEG-2 Contribution Encoder
A-2 01-0934-401-B
Timing
•
Lip synchronization adjustment ±500 ms.
Transport Output
•
MPEG-2, DVB-compliant transport stream.
•
Two DVB ASI outputs (75O BNC connectors), 1
to 80 Mbps, in units of 1 bps.
Front Panel Control
•
Back-lit, full-travel push buttons; three special
purpose buttons: Carrier, Modulate, Status.
•
Recessed AC power switch on the front panel.
•
Backlit 2 x 40 LCD display.
•
24 user-programmable preset configurations.
Remote Control
•
EIA-232 on male DB-9 connector (DTE), ASCII
commands.
•
IEEE 802.3 10/100Base-T (Ethernet) on RJ-45
connector, ASCII commands via Telnet.
Fault Monitoring
•
Contact closure for alarm conditions on RJ-11
connector.
Software Upgrade
•
Compact flash, EIA-232 remote port, Ethernet
remote port.
Physical
•
1U high, rugged chassis suitable for mobile
operations, 19” rack-mount, 17.7” (45 cm) deep.
•
Weighs less than 5.5 kg (12 lb)
Power Supply
•
Autoranging 90 to 240 VAC, 50/60 Hz, 70 W
typical consumption
Operating Conditions
•
-10° to +50°C, up to 95% humidity, non-
condensing.
•
Redundant fans with fault monitoring.
OPTIONAL FEATURES
Video Processing
•
MPEG-2 4:2:2 (Studio Profile @ Main Level),
2.5 to 50 Mbps..
•
DVB 4:2:2 expanded windows carries WSS,
VPS, VITC, CC, AMOL, XDS, NABTS, and
others.
•
Field upgradeable from 4:2:0 to 4:2:2.
•
Spatial and temporal pre-filtering for
compression efficiency and noise reduction.
Audio Input
•
Two AES/EBU digital stereo pairs embedded in
SDI, 48 Ksps sample rate.
Built-In Test
•
Internally generated audio test tone and video
test pattern.
Modulator Output
•
DVB-compliant QPSK (optional 8PSK and
16QAM)
•
Symbol rate 1 - 30 Msps.
•
IF output 50 - 180 MHz , 0 to -25 dBm, 75O
BNC.
•
L-Band output 950 - 1750 MHz, 0 to -25 dBm,
SMA connector (950 - 2050 MHz option).
•
IF or L-Band monitor output F-connector.