Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 53 / 161

Using a Remote Unit SE4000 MPEG-2 Contribution Encoder
4-20 01-0934-401-B
Front Panel Menu Summary
Command Function Options/Response Format
Main>Service #
>Data
Used to configure the SE4000 auxiliary data. The Data menu has two data
channels, A and B. Both data channels have identical parameters and options
that are used to configure the auxiliary data ports.
Enable Determines whether or not
auxiliary data is included in the
output transport stream.
? on – auxiliary data is included in the output
transport stream.
? off – disables the port and does not include
auxiliary data in the output transport stream
(default).
PID Query-only, displays the data
PID number included in the
output transport stream.
Default Async data- 42 (2Ah)
Default Sync data – 43 (2Bh)
Baud Sets the baud rate for the
asynchronous auxiliary data
channel
Note: Baud is only available
for the Asynchronous data
channel.
1200, 2400, 4800, 9600, 19200, 38400 bps
default: 38400 bps
Data Width Sets the character length for the
asynchronous auxiliary data
channel
Note: Data Bits is only
available for the
Asynchronous data channel.
7, 8
default: 8
Parity Sets the parity for the
asynchronous auxiliary data
channel.
Note: Parity is only available
for the Asynchronous data
channel.
none, even, odd
default: none
Stop Bits Sets the number of stop bits for
the asynchronous auxiliary data
channel.
Note: Stop Bits is only available
for the Asynchronous data
channel. .
1, 2
default: 1
Flow Control Sets the flow control for the
asynchronous auxiliary data
channel.
Note: Flow Control is only
available for the
Asynchronous data channel. .
None
Hard
1 to 4096000 bps
default:1024000 bps
Data Rate Sets the number of data bits for
the synchronous auxiliary data
channel
Note: Data Rate is only
available for the synchronous
data channel.
Additional Information: The data rate for the
auxiliary data channel reduces the total transport
stream bit rate available for the video signal;
therefore, an auxiliary data rate should be selected
that meets but does not exceed the site-specific
operational requirements.