Radyne ComStream TIERNAN SE4000, Installation And Operation Manual

Page: 34 / 161

SE4000 MPEG-2 Contribution Encoder Using the Front Panel
01-0934-401-B 3-1
Using the Front Panel
3
This chapter describes the following SE4000 front panel information:
•
Components
•
Commands, including navigating, setting and changing parameters
•
Menus, options, and parameters
3.0 Front Panel Components
The front panel enables you to easily and efficiently configure and monitor the SE4000.
The front panel consists of:
•
LCD – displays menus, parameters, information, and messages
•
Enter button – used to select a menu item, issue a command, or set a parameter
•
Exit button – used to scroll up to a previous menu level or leave a parameter without
changing it’s option
•
Left and Right buttons – used to scroll within the current menu level, or to scroll through a
list of parameters
•
Up and Down buttons – used to scroll through parameter options and increase and
decrease parameter values
•
Alphanumeric keypad – used to enter alphabetic and numeric parameter values
•
Status button – hot key which toggles between the current front panel menu and the
current faults list
•
Status LED – tri-color LED alerts you to status and fault conditions
•
Modulator control buttons and LEDs – these two buttons affect the power and form of the
output IF transmit carrier from the encoder:
•
Carrier – enables carrier wave at nominal power
•
Mod – enables modulated carrier at nominal power