1. OPERATION
1-69
1.39.4
How to customize the operation
You can customize the opera-
tion on the [OPERATION]
menu. Open [MAIN MENU],
click [CONFIGURATION].
Then click [OPERATION] to
open the [OPERATION] menu.
1.39.5
Transmit time
ON time, TX time and TRON time are shown on the stand-by display. You can also
show these values by using the Transmit icon.
[REF POINT]:
The reference point for measurements (range, bearing, etc.)
and markers (heading line, stern mark, etc.) can be antenna
point or consistent common reference point (CCRP), which is
a location on own ship to which all horizontal measurements,
for example range, bearing, relative course, relative speed,
closest point of approach (CPA) or time to closest point of ap-
proach (TCPA), are normally referenced. Select reference
point, [ANT] or [CCRP], as appropriate.
[KEY BEEP]:
A beep sounds when a keying sequence has been correctly
executed.
[OFF]: No key beep
[LOW], [MID], [HIGH]: Loudness of key beep
[OWN SHIP VECTOR]: Select what the own ship vector displays.
[OFF]: No own ship vector
[COURSE]: Vector shows course.
[HEADING]: Vector shows heading direction.
[CURSOR SIZE]:
Select the size of the cursor, [SMALL] or [LARGE].
[GUIDANCE]:
[TOUCH-PAD]:
Touch pad settings.
[TOUCH-PAD]: Activate or deactivate the touch-pad.
[SENSITIVITY]: Adjust the sensitivity of the touch-pad opera-
tion. [5] is the highest sensitivity.
[POINTING-DEVICE]:
Pointing device (mouse) settings.
[POINTING-DEVICE]: Activate or deactivate the pointing de-
vice.
[SENSITIVITY]: Adjust the sensitivity of the pointing device
operation. [5] is the highest sensitivity.
[OPERATION]
1 BACK
2 REF
POINT
ANT
/CCRP
3 KEY
BEEP
OFF
/LOW/MID/HIGH
4
OWN SHIP VECTOR
OFF
/COURSE/HDG
5 CURSOR
SIZE
SMALL
/LARGE
6 GUIDANCE
OFF
/ON
7 [TOUCH-PAD]
8 [POINTING-DEVICE]
[LARGE]
(Cursor with cursor lines)
Cursor
Cursor
Cursor line
Cursor line
Cursor
Cursor
[SMALL]
(Cursor only)
