1. OPERATION
1-37
How to set the nav lines
Nav lines are set on both sides of own ship. The distance to port or starboard is indi-
vidually determined.
1. Click the appropriate [NAV] icon to display a nav line. If the nav line is already dis-
played, go to step 2.
2. Click the [NAV] icon to activate the nav line. The icon turns yellow.
3. Click the position where you want to put the nav line in the radar display area.
How to turn off a nav line
Long press the appropriate [NAV] icon with the left button. The location of the line is
retained in the memory when the power is turned off.
1.28
Alarms, Error Messages
1.28.1
Alarm indication
When the alarm is generated, the [ALARM] icon flashes (in red) and the audio alarm
sounds.
How to acknowledge the alarm
Click the [ALARM ACK] icon to acknowledge the alarm and silence the audio alarm.
The [ALARM] icon continues flash until the cause of the alarm is cleared.
Icon indication
Status
Meaning
No alarm.
Red character and
flashing.
An alarm is generated.
Red character and
not flashing.
All generating alarms are acknowledged.
Or all alarms are not in alarm status but not
acknowledged.
82 9°
T
NAV
0.150NM
NAV
0.150NM
82 9°
T
NAV
0.150NM
NAV
0.150NM
Click
Highlighted yellow
RIVER
ROT
RUDDER
1.2/ 0.5
km
HEAD-UP
RD003001
STBY
OFFCENT
HDG
123.4°
MASTER
ALARM
ALARM
ACK
L
OFF
(at the top left corner
on the screen)
[ALARM ACK] icon
[ALARM] icon
ALARM
ALARM
ALARM
