Rackable Systems OmniStor 4900F Series, User Manual, Page: 192 / 196

Appendix C - Regulatory Information
AC Power Cord Selection
178
AC Power Cord Selection
n
This enclosure is intended for indoor use only.
n
This enclosure is intended to be plugged into a 6A branch circuit in Europe.
n
To select the proper power cord:
For 110 Volt Operation – Use a UL Listed/CSA Labeled cord set consisting of a
minimum 18 AWG, type SVT or SJT three conductor cord, terminating in a molded
connector body having an IEC CEE-22 female configuration on one end and a
molded-on parallel blade grounding type attachment plug rated 15A, 125V
configuration (5 - 15P) at the other end.
For 230 Volt Operation (North America) – Use a UL Listed/CSA Labeled cord set
consisting of a minimum 18 AWG, type SVT or SJT three conductor cord, terminating
in a molded connector body having an IEC CEE-22 female configuration on one end
and a molded-on tandem blade grounding type attachment plug rated 15A, 250V
configuration (6 - 15P) at the other end.
For 230 Volt Operation (Europe) – Use a cord set marked “HAR”, consisting of a
H05VV-F cord that has a minimum 0.75 square mm diameter conductors provided
with an IEC 320 receptacle and a male plug for the country of installation rated 6A,
250V.
NOTE:
The enclosure automatically selects the proper settings for the input voltage.
Therefore, no additional adjustments are necessary to connect the unit to any input
voltage within the range marked on the drive.
n
Das Laufwerk sollte nicht im Freien verwendet werden.
n
In Europa, sollte das Laufwerk an einen 6A-Stromkreis angeschlossen werden.
n
Zur Wahl des korrekten Netzkabels beachten Sie bitte folgendes:
230V-Betrieb (Europa) – Verwenden Sie Netzkabel der Bezeichnung “HAR” die
H05VV-F-Kabel und einen Leitungsdurchmesser von mindestens 0,75 mm2
aufweisen. Verwenden Sie eine IEC 320-Buchse und einen für das Installationsland
passenden Stecker, der auf 6A und 250V gesichert ist.