Rackable Systems OmniStor 4900F Series, User Manual

Page: 84 / 196

Chapter 3 - Setup and Installation
Stand-Alone Dual Port Dual Host Single Connection Configuration
70
3
Locate the switches on the SES Controller card and set them as indicated in the
illustration below. Refer to “SES Controller Card Switch Setting Overview” on
page 56 for the other available settings.
SES Controller Card Switch Settings
4
Set the switches 1, 2, and 4 to the “Up” position on the Host I/O cards.
Loosen the two captive fastener screws for a Host I/O card and pull it from the
enclosure using the fastener screws. Set the switches as described in the
illustrations below. Refer to the “Host I/O Card” on page 13 for switch setting
details.
5
Re-install the Host I/O card. Repeat step 4 for the second Host I/O card.
Host I/O Card and Switch Settings