Rackable Systems OmniStor 4900F Series, User Manual

Page: 14 / 196

About this Manual
Features
x
n
Dual 2 Gb/sec (gigabit per second) Fibre Channel ports per Host I/O card.
Fabric ports are optimized with full duplex operations and auto-negotiate
features.
n
Dual 2 Gb/sec disk side ports for high performance, failure resilient paths to
the drives. Full duplex operations optimize disk channels.
n
Capable of sustaining 350 MB/sec sequential RAID 5 reads and up to 100,000
IOPs in active-active configurations.
n
Support for up to 512 logical drives.
n
Support for RAID levels 0, 1, 5, 10, and 50.
n
Online capacity expansion allowing reconfiguration without interruptions.
n
Dynamic Drive Addressing where the drives do not require hard addressing,
allowing for increased flexibility in configurations.
n
Built-in support for drive firmware updates, allowing one or several disk drives
to be updated in parallel.
n
VT-100 interface for configuration and monitoring.
n
Controller firmware updates can be accomplished through a VT-100 terminal
or StorView Storage Management Software.
n
Host clustering support for maximum data availability.