quadient IN-600 User Manual Download Page 229

Page: 229 / 254

Auto-Feeder Jamming

Envelopes are stopped in the Auto-Feeder.

Actions

Possible causes

Clear the Automatic Feeder as indic-
ated below.

Correct the cause:

- Mail sizes: see

Mail Specifica-

tions

on page 237.

- Envelope stack height: 101.6mm

/ 4" max.

- Envelope stacking: see

Using the

Feeder

on page 35.

• Item is too thick.
• Mail size is incorrect.
• Too many envelopes are on the feed

deck.

• Envelopes are not properly inserted

onto the feed deck.

Actions

Possible causes

Feed sealed envelopes with sealing
OFF.

Check that sealed envelopes are prop-
erly sealed at the leading edge. Partially
sealed envelopes will jam.

• Sealing is ON while feeding sealed

envelopes.

The mail transport path should be regularly cleaned. See

Cleaning

the Mail Path

on page 213.

224

| Page 224 | Jan-13-2017 10:45 |

roub

leshooting

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands