quadient IN-600 User Manual Download Page 210

Page: 210 / 254

Check the printed pattern and press the letter that corresponds to the straightest and
complete vertical line.

Press [OK] to validate.

Repeat the previous step until lines F are aligned.

Cleaning the Print Heads

If your Meter Impressions do not look sharp and clear, clean the Print head to restore your
print quality.

How to Clean the Print Heads Automatically (as a User)

To clean the print heads automatically:

As a user:

Press

and select the path:

Ink Cartridge

Cleaning Process

The cleaning starts automatically.

Maintaining y

our Mailing System

205

| Page 205 | Jan-13-2017 10:45 |

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands