quadient IN-600 User Manual Download Page 198

Page: 198 / 254

Modifying the List of Slogans

The procedure below allows you to change the menu name of a slogan or to remove a
slogan from the list.

How to Modify or Delete a Slogan

To modify or delete a slogan:

Display the list of slogans (see

How to Display the List of Slogans

on page 192).

Select the slogan and press [OK].

The Slogan setting menu is displayed.

To change the name of the slogan:

Select Edit.

Change the slogan name using the keypad and press [OK].

The system updates the slogan list.

To delete the slogan:

Select Delete.

The system asks for a confirmation.

Press [OK] to confirm deletion.

The system updates the slogan list.

Downloading New Slogans

The procedure below allows you to download new slogans.

Options and Updates

193

| Page 193 | Jan-13-2017 10:45 |

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands