quadient IN-600 User Manual Download Page 228

Page: 228 / 254

Paper Jamming

11.1

Base Jamming

Envelopes are stopped in the transport mechanism of the Base.

Actions

Possible causes

Clear the Base as indicated below.

Correct the cause indicated in the left
column:

- Mail sizes: see

Mail Specifica-

tions

on page 237.

- Envelope stacking: see

Using the

Feeder

on page 35.

• Mailpiece is too thick.
• Mail size is incorrect.
• Envelopes are not properly stacked

on the feeder platform.

How to Clear Mail Jammed in the Base

To clear mail jammed in the Base:

Pull the release handle located underneath the base to lower the transport belts and
wheels. Hold the handle.

Using your other hand, remove the jammed envelopes.

Release the jam release handle to put the transport belt and wheels back in position.

223

| Page 223 | | Jan-13-2017 10:45 |

roub

leshooting

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands