quadient IN-600 User Manual Download Page 103

Page: 103 / 254

Type a PIN code to log in

Select the account to track
postage

Tracks postage by Ac-
count/Department

Controls access to system
and to accounts

'Accounts, with Access
Control'

(same as modes with ac-
counts listed above)

Postage tracking and access
control managed from the PC

'Remote Account Manage-
ment'

How to Display and Change the Account Mode

To display and change the Account mode:

As supervisor (see

How to Log in as Supervisor

on page 154):

Press

and select the path:

Account Management

Account Mode

Selection

The Account Mode Selection screen is displayed with the current Account Mode
shown.

Select another Account mode.

Press [OK] to confirm.

If required, enter the PIN code and press [OK].

The Mailing System then confirms that the Account Mode has been changed.

If you have selected the 'Remote Account Management' mode, a
connection process to the MAS begins. If the connection fails, the
previous account mode remains active.

| Page 98 | Jan-13-2017 10:45 |

Mana

ging Accounts and Assigning Rights

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands