quadient IN-600 User Manual Download Page 88

Page: 88 / 254

Piece Counting

How to Count Mail pieces by Weighing

This function uses the Weighing Platform to count a stack of identical mail pieces.

To count mail pieces by weighing:

As a user:

Press

and the path: Piece Counting

Press [OK].

Place 10 items on the Weigh Platform and press [OK].

Put the complete stack of items on the Weigh Platform and press [OK].

The total number of items is displayed.

You must first weigh 10 (ten) items in order to get the count of the
total number of items.

Filling the Label Dispenser

How to Fill the Automatic Label Dispenser

To fill the Label Dispenser:

Stack the labels and insert them in the dispenser, the printing side should face to the
right with the peel-off tab on the top.

Push the block of labels down until you feel the label “click” into position.

Pr
ocessing Mail

| Page 83 | Jan-13-2017 10:45 |

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands