quadient IN-600 User Manual Download Page 63

Page: 63 / 254

Insert the mail piece(s) into the mail path against the rear-guide wall, side to be printed
facing upwards (see

How to Use the Feeder

on page 35).

The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.

If mail piece is bigger than mail path maximum thickness (see

Mail

Specifications

on page 237), press

before you press

to print a label. The label is printed.

Otherwise, if you want to print several identical labels:

Press

and enter the number of labels.

Make sure the labels are available in the label dispenser (see

Filling the Label

Dispenser

on page 83).

Press

to print labels.

| Page 58 | Jan-13-2017 10:45 |

Pr
ocessing Mail

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands