quadient IN-600 User Manual Download Page 79

Page: 79 / 254

Changing the Weighing Mode

At start-up, the default weighing mode is active.

See also

• To change the default weighing mode as supervisor, see

How to Change the Weighing

Mode

on page 74.

• To change the weighing mode according to the type of process you want to run (see

Choosing a Weighing Mode

on page 72), follow the steps outlined below.

How to Change the Weighing Mode

To change the weighing mode from the home screen:

Either:

Press

and select the path:

System Settings

Weighing Modes

Press

The Weighing mode screen is displayed.

The options actually displayed in the screen depend on the weighing
devices that are connected to your Mailing System and on features
that are activated.

Select the weighing mode.

If you select the option Differential Weighing Automatic tape, make
sure the Auto-Label Dispenser is properly filled with labels. See

How to Fill the Automatic Label Dispenser

on page 83.

| Page 74 | Jan-13-2017 10:45 |

Pr
ocessing Mail

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands