quadient IN-600 User Manual Download Page 220

Page: 220 / 254

Cleaning the Feeder Belts and Rollers

Follow the steps below to clean the belts and rollers of the feeder.

How to Clean the Feeder Belts and Rollers

To clean the feeder belts and rollers:

Open the Auto-Feeder cover, press the upper blue handle to raise the drive assembly.

Clean the belts and/or rollers with a damp cloth or 70° alcohol on a cotton applicator.

Push down the upper drive assembly until it locks back into position and close the
feeder cover.

Cleaning Mail Path Sensors

The sensors are light sensitive devices successively covered by the envelopes during their
travel along the mail path.

Clean the mail path sensors as indicated below on system base and feeder.

Maintaining y

our Mailing System

215

| Page 215 | Jan-13-2017 10:45 |

Summary of Contents for IN-600































































































































































































































































Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands

quadient IN-600, User Manual

Search results

Summary of Contents for IN-600

Reviews:

Related manuals for IN-600

Brands by name

Popular brands