Qlogic SANbox 1400 Series, User Manual

Page: 254 / 278

A – Command Line Interface
Zone Command
A-100 59226-00 B
S
delete [zone]
Deletes the specified zone given by [zone] from the zoning database. If the zone
is a component of the active zone set, the zone will not be removed from the
active zone set until the active zone set is deactivated.
list
Displays a list of all zones and the zone sets of which they are components. This
keyword does not require an Admin session.
members [zone]
Displays all members of the zone given by [zone]. This keyword does not require
an Admin session.
remove [zone] [member_list]
Removes the ports/devices given by [member_list] from the zone given by [zone].
Use a <space> to delimit aliases and ports/devices in [member_list].
[member_list] can have any of the following formats:
„
Domain ID and port number pair (Domain ID, Port Number). Domain IDs can
be 1–239; port numbers can be 0–255.
„
6-character hexadecimal device Fibre Channel address (hex)
„
16-character hexadecimal worldwide port name (WWPN) with the format
xx:xx:xx:xx:xx:xx:xx:xx.
„
Alias name
rename [zone_old] [zone_new]
Renames the zone given by [zone_old] to the zone given by [zone_new].
type [zone] [zone_type]
Specifies the zone type given by [zone_type] to be assigned to the zone name
given by [zone]. If you omit the [zone_type], the system displays the zone type for
the zone given by [zone]. [zone_type] can be one of the following:
soft – name server zone
hardACL – Access control list hard zone. This keyword is case sensitive.
zonesets [zone]
Displays all zone sets of which the zone given by [zone] is a component. This
keyword does not require an Admin session.