Proximus forum 523 Mounting And Commissioning Manual Download Page 206

Page: 206 / 228

General/Hardware

204

Frequently Asked Questions

Frequently Asked Questions

This chapter provides tips and information on how to deal with any malfunc-
tions or faults you may experience with the Forum 523/524.

Please note:

Repairs to the Forum 523/524 should only be carried out by
qualified personnel.

The following LEDs indicate that the Forum 523/524 is ready for operation:

Position of LEDs on the Forum 523/524
The WAN/LAN LEDs are illuminated, if a device is connected

General/Hardware

Question: The Forum 523/524 is not functioning.

Make sure the mains plug is properly connected.

Plug another device into the mains socket to check whether there is any
voltage.

Question: The mains plug is connected, the mains socket is supplying
output, but the Forum 523/524 still does not function.

DANGER!

This device contains hazardous voltages. To make the
system dead, remove the power plug from the socket.

Open the housing (see

Opening and Closing Forum 523/524

starting on

page 33). Is the power LED illuminated?

If not, contact your service centre. The AC adapter plug of the Forum 523/524
may be defective.

WAN/LAN LAN/LAN

Ready LED: flashes (1 sek. on / 1 sek. off)
when the Forum is operative
Power LED: is illuminated when connected
to power supply
LAN LED for slot 2

Summary of Contents for forum 523





































































































































































































































Search results

Summary of Contents for forum 523

Reviews:

Related manuals for forum 523

Brands by name

Popular brands

Proximus forum 523, Mounting And Commissioning Manual

Search results

Summary of Contents for forum 523

Reviews:

Related manuals for forum 523

Brands by name

Popular brands