manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 63

Installing Interface Cards

Mounting the Forum 524 Rack InfoCom System

61

Installing Interface Cards

Please note also the explanations in these sections: 

Installing Interface Cards

 

starting on page 38. To install the card, perform the following steps:

1.

Switch off the Forum 524 Rack and pull the plug out of the mains power 
supply. Unscrew the screws of the top cover. Take the top cover off.

2.

To discharge, touch a radiator or another metallic installation connected to 
earth ground. Take the interface card out of its packaging. Check that it is 
the correct type of card. There is a label specifying the type on the 
connector.

CAUTION!

Static charges can damage the electronic components of the 
Forum 524 Rack. 

3.

Carefully plug the interface card into its designated slot.

Make sure the card is sitting firmly in the slot.

4.

Install the metal screen on the front panel. 
Each interface card type requires a matching 
metal screen. An overview of available metal 
screens can be found under 

Mounting Interface 

Cards

 starting on page 59. Verify the tight 

connection of both connectors. Tighten the 
fastening screws.

5.

Close the top cover. Tighten the screws of the top cover. Switch on the 
Forum 524 Rack.

You can view the interface card’s status in the Web console once you have 
restarted Forum 524 Rack. To do this, call up the menu item 

Telephony: 

Ports: Slots

. The 

inserted

 column displays the interface card that is currently 

installed.

Front Panel

Interface Card

Connectors

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands