Proximus forum 523 Mounting And Commissioning Manual Download Page 66

Page: 66 / 228

Configuring the Forum 523/524

Configuration

Change the

IP Address

(PC)to 192.168.99.252. Change the

subnet mask

to 255.255.255.0, confirm with

and

Close

Start a Web browser and in the address field enter
“http://192.168.99.254/” .

The Web console’s log-on page will be displayed. Enter the user name
“Administrator” without a password for the initial configuration.

Note:

To support your next configuration steps, you should activate
the

Assistant

mode on the entry page of the

Configurator

Please also pay attention to the online help.

Tip:

To find out the IP address of the Web console, enter the code digit
procedure

* 1 8 2

on a connected system telephone. You

can also view the net mask by entering the procedure

* 1 8 3

(see also

Codes for IP Configuration

starting on

page 71). The PC’s IP address must be in this network range.

Note:

Deactivate any connection via a proxy server which has been
configured. Open the Internet Explorer, go to the menu

Extras

and open the

Internet options

dialogue box. Select the

Connec-

tions

Proxy Server

Configuring the Forum 523/524

Preparing the Configuration

Before starting with the configuration, make sure you have the following
documents at hand:

●

An overview of the ports

●

A list of the terminals to be connected

●

A list of the IPEIs, if you wish to log on DECT terminals in the secure
procedure

●

A list of the users to be set up (staff entitled to use the services of the
Forum 523/524) with their names, departments, and the internal call
numbers you want to allocate to them

●

For Internet access: the Internet service provider access data.

●

Data medium with current system software

Summary of Contents for forum 523





































































































































































































































Search results

Summary of Contents for forum 523

Reviews:

Related manuals for forum 523

Brands by name

Popular brands

Proximus forum 523, Mounting And Commissioning Manual

Search results

Summary of Contents for forum 523

Reviews:

Related manuals for forum 523

Brands by name

Popular brands