manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 213

Internet

Frequently Asked Questions

211

Question: A SIP connection only passes unidirectional voice. What is the 
reason?

You did not use the Forum 523/524 as internet router or the STUN server of 
the SIP provider is unavailable. You did not use the Forum 523/524 as 
internet router or the STUN server of the SIP provider is unavailable. You need 
to activate the SIP support at your internet router, such as “SIP-ALG” or “Full 
Cone NAT” functions. You can also use the Forum 523/524 for internet 
access. Correct the STUN setting in the 

Telephony

: 

Trunks

: 

SIP Provider

 

menu.

Question: Is it possible to use Q.SIG-IP / SIP tie line connections via an 
Internet access with dynamic IP address?

No. Q.SIG-IP / SIP tie line connections require (as with IP system telephones 
and SIP terminals) a fixed IP assignment and a connection without NAT for 
technical and security reasons. It is possible to tunnel a Q.SIG-IP / SIP tie line 
connection through a VPN connection. A VPN connection offers the possibility 
to determine the peer’s IP address with a DynDNS service during connection 
setup. VPN and DynDNS can be realized with external servers or routers also.

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands