manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 113

VoIP System Telephones

Voice over IP (VoIP)

111

device entry with this call number exists and has the same device type, the 
login procedure continues. If the device entry is currently active on another 
device, the associated remote Forum IPhone 512 / Forum IPhone 545 will be 
logged out automatically and will show a login page on its part. The now 
logged in Forum IPhone 512 / Forum IPhone 545 starts and will get its 
configuration from the newly assigned device entry.

Note:

When adding the device entry, it is also possible to activate the 

Logged out

 option. 

VoIP System Telephones

The following telephones and software packages are available for VoIP 
system telephony:

●

Forum IPhone 525: This is a VoIP-enabled edition of the Forum Phone 525 
system telephone. This system telephone can be extended with up to three 
key extensions (Forum 500 Keypad Paper FP 525/535). 

●

Forum IPhone 535: This is a VoIP-enabled edition of the 
Forum IPhone 535 system telephone. This system telephone can be 
extended with up to three key extensions (Forum 500 Keypad Paper 
FP 525/535 or Forum 500 Keypad Display FP 535).

●

Forum IPhone PC: This VoIP software offers the functionality of an system 
telephone using Windows executable software (see 

Forum IPhone PC

 

starting on page 118). This software also provides local answering 
machine functionality and can be integrated into CTI applications.

Device Properties

The VoIP-enabled versions of the system telephones Forum IPhone 525 and 
Forum IPhone 535 offer the same features as the corresponding system tele-
phones. Using VoIP system telephones is therefore not much different from 
using standard system telephones. The following differences exist:

●

Two RJ45 connector ports are available for ethernet connection. The ports 
are connected to one another via the telephone’s internal switch. The 
switch supports 10 Mbit/s or 100 Mbit/s full-duplex with priority given to 
VoIP data transmission.

LAN Port

: Allows the telephone to connected to the LAN. Use a non cross-

over RJ45 patch cable to connect to a Hub or Switch.

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands